infrastructure

Warrnambool line sleeper replacement works brought forward

Upgrades on the Warrnambool line have been brought forward, with works to begin on June 9.

The works involve the replacement of 27,000 timber sleepers with concrete sleepers at a cost of $8.1 million.

V/Line staff and contractors will work through the night in 10-day blocks to renew the line. The work will be focussed on the section of the line between Colac and Waurn Ponds after other upgrade works were done in late 2018 and early 2019 on the section between Warrnambool and Colac.

Although the works will be conducted at night, trains will run slower than normal after the works are complete to allow the sleepers to bed down. Some trains will be replaced by buses. Freight services will operate as normal.

Once works are complete, Minister for Public Transport Melissa Horne said that passengers would enjoy a smoother ride.

“These works help to ensure V/Line can continue to offer a safe, reliable and comfortable experience for passengers who rely on the service.”

The sleepers are being produced by Austrack at their Avalon facility.

“This project is not only going to benefit south-western Victorian public transport users but is supporting local business to get the job done,” said Member for Western Victoria Gayle Tierney.

The Victorian government has been carrying out sleeper replacement works on other regional lines, including a $16.1m program on the Bendigo line that used 48,000 concrete sleepers.

Auckland

Rail renewal underway on Auckland network

12 kilometres of rail and 2,500 sleepers are being replaced at the centre of the rail network in Auckland.

Staff from KiwiRail are working at night and on weekends to renovate the track on the Eastern Line between Britomart and Otahuhu.

Chief operating officer of KiwiRail, Todd Moyle, said that the works would enable faster, more reliable services.

“Getting this work done will enable us to remove speed restrictions on the line and when finished, commuters will enjoy a quicker, smoother and quieter journey,” said Moyle.

“Replacing the rail and sleepers can only be done when no trains are running. We have worked closely with Auckland Transport to settle on a work programme that allows us to minimise disruption for commuters while enabling us to get the work done efficiently and safely.”

The team of 200 people will be repairing a line that is used by 3,500 commuter services and 246 freight trains each week. The amount of traffic has required limits on the line.

“That amount of rail traffic causes wear and tear on the rails over time, just as heavy traffic does to road surfaces, and in some cases we have to put speed restrictions in place. It is critical that we replace the rails so we can keep trains running efficiently and safely on the network for the thousands of rail commuters,” said Moyle.

Buses will replace trains during the evening and at weekends and noise and disturbances will be minimised to reduce disruption.

“We are working progressively across the entire network to replace the oldest and most worn sections of track, with 23km of new rail already in place across the network since March 2019. This period of work on the Eastern Line will take about eight weeks, with more work planned for late September,” said Moyle.

Auckland’s rail network has seen an increase in patronage, and with new lines being built, the rail network is expected to shoulder a greater capacity of the city’s transportation.

“The work forms part of an ongoing project to improve the Auckland network, lay a foundation for predicted growth in passenger and freight volumes, and ensure the benefits of the City Rail Link can be delivered,” said Moyle.

Resleepered track on WA's Leonora Branch Line. Photo: Brookfield Rail

Victoria’s $27 million sleeper replacement project underway

Sleeper replacement work has begun along the Shepparton line as part of the Victorian government’s more than $27 million sleeper replacement project.

A crew of 50 V/Line staff is working through the night in 10-night blocks to replace the first of 37,000 sleepers on the 83-kilometre section of track between Seymour and Shepparton.

“Crews are working through the night to get these essential sleeper replacements done while minimising disruptions to passengers,” minister for public transport Melissa Horne announced on Monday.

The government says the work is progressing quickly with workers now on the section of track between Murchison East and Toolamba.

Because of the major work, Shepparton trains will travel over the new sleepers at a slower speed to allow them to bed down.

“As a result, all services have an additional two minutes’ journey time during the works,” according to a government statement.

The major overhaul will reduce the need for future maintenance work, as well as improving the ride quality of the track, and ensuring safer and more reliable service for north east communities.

“We’ve invested more than $27 million on sleeper replacements along the rail corridor in the last 12-months as part of our plan to deliver more reliable services for locals,” member for Northern Victoria Jaclyn Symes said.